Loading Paper
25
2
Note
❒ When loading paper other than
A4L(long-edged feed) or 8
1
/
2
×
11L(long-edged feed), adjust
the paper size dial to match the
size and feed direction of the
paper in the paper tray.
❒ When loading paper other than
A4K(short-edged feed) or 8
1
/
2
× 11L(long-edged feed), you
should extend the tray.
D Carefully slide the paper tray into
the printer until it stops.
Important
❒ Confirm that the setting of the
paper size dial matches the sizes
and feed direction of the paper
in the tray. Otherwise, the print-
er might be damaged or a print-
ing problem might occur.
❒ Do not slide the paper tray in
and out with force. If you do,
the front and side paper guides
will move out of the place.
Reference
For details about usable types of
paper, see “Loading Paper”,
Maintenance Guide.
AGN033S
ZKGY150E
KirP4GB_Setup-F4_FM_forPaper.book Page 25 Wednesday, December 8, 2004 6:05 AM
To Next Page
Loading...
