Ricoh Aficio MP 1600 - Changing a User Code

Registering Addresses and Users for Facsimile/Scanner Functions
148
7
N Press [End].
O Press the {OK} key.
P Press the {User Tools/Counter} key.
Note
! You can enter a one-to eight-digit user code.
! For registration of a name, see "Registering Names".
Reference
p.140 “Registering Names”
Changing a User Code
This section describes how to change a user code.
Important
! Even if you change a user code, the counter value will not be cleared.
A Select [System Settings] using {U} or {T}, and then press the {OK} key.
B Select [Administrator Tools] using {U} or {T}, and then press the {OK} key.
C Select [Address Book Management] using {U} or {T}, and then press the {OK}
key.