23
2. Copying
This chapter describes procedures for making copies in various modes.
Basic Procedure
This section describes the basic procedure for making copies.
Important
❒ When User Code Authentication is set, enter your user code (up to eight dig-
its) with the number keys so that the machine accepts copy jobs. See “Authen-
tication Information”, General Settings Guide.
❒ When Basic Authentication, Windows Authentication, LDAP Authentica-
tion, or Integration Server Authentication is set, enter your login user name
and user password so that the machine accepts copy jobs. Ask the adminis-
trator for the login user name and login password. For details, see “When the
Authentication Screen is Displayed”, About This Machine.
A Make sure "Ready" appears on the screen.
If any other function is displayed, press the {Copy} key.
❖ Initial copy display
B Make sure no previous settings remain.
When there are previous settings remaining, press the {Clear Modes} key.
C Place the originals.
D Make desired settings.
E Enter the number of copies using the number keys.
The maximum copy quantity that can be set is 99.
To Next Page
Loading...
