Copier Functions
31
2
A Press [R/E].
B Press [Zoom].
C Enter the ratio.
To select the ratio using {U} and
{T}
A Adjust the ratio using {U} or
{T}.
Note
r If you have incorrectly en-
tered the ratio, readjust using
{U} or {T}.
r To change the ratio in incre-
ments of 10%, press and hold
down {U} or {T}.
B Press the {OK} key.
The “
Programmed” message ap-
pears.
To enter the ratio using the
number keys
A Enter the desired ratio using
the number keys.
B Press the {OK} key.
The “
Programmed” message ap-
pears.
D Place your originals, and then
press the {Start} key.
Auto Reduce/Enlarge
You can choose an appropriate repro-
duction ratio based on the paper and
original sizes you select.
Note
r You cannot use the bypass tray
with this function.
r When using Auto Reduce/Enlarge,
see the following table for original
sizes and orientations you can use:
v Metric version
Original location
Original size and
orientation
Exposure glass A3L, B4 JISL,
A4KL, B5 JISK,
8
1
/
2
" × 13"L
ADF or ARDF A3L, B4 JISL,
A4KL, B5
JISKL, A5KL,
8
1
/
2
" × 13"L
To Next Page
Loading...
