Specifications for the Main unit
51
3
Specifications for the Main unit
Following describes the specification of the main unit.
❖ Configuration:
Desktop
❖ Photosensitivity type:
OPC drum
❖ Original scanning:
One-dimensional solid scanning system through CCD
❖ Copy process:
Dry electrostatic transfer system
❖ Development:
Dry two-component magnetic brush development system
❖ Fusing:
Heating roll pressure system
❖ Resolution:
600 dpi
❖ Exposure glass:
Stationary original exposure type
❖ Original reference position:
Rear left corner
❖ Warm-up time:
• Machine with copier function only
10 seconds or less
• Machine with copier, facsimile, printer, and scanner function
35 seconds or less
❖ Maximum original size:
A3L, 11" × 17"L
❖ Copy paper size:
• Paper trays: A3L – A5K, 11" × 17"L – 5
1
/
2
× 8
1
/
2
K
•Bypass tray: A3L – A6L, 11" × 17"L – 5
1
/
2
" × 8
1
/
2
"L
• Bypass tray (custom size):
Vertical: 90.0-297.0 mm, 3.55"-11.69"
Horizontal: 148.0-600.0 mm, 5.83"-23.62"
• Duplex unit: A3L – A5KL, 11" × 17"L – 8
1
/
2
" × 11"L
To Next Page
Loading...
