17
2. Combined Function
Operations
Changing Modes
Note
r You cannot switch modes in any of the following situations:
• During immediate transmission
• When accessing User Tools
• While scanning an original
r The copying screen is displayed as default when the power is turned on. You
can change this default setting. See p.25 “Function Priority”.
-System Reset
The machine returns automatically to its initial condition when the job is fin-
ished, after a certain period of time has elapsed. This function is called “System
Reset”.
Note
r You can change the System Reset time. See p.29 “System Auto Reset Timer”.
Scanner
Printer
Copy
C
S
D
APE027S
To Next Page
Loading...
