Changing the Paper Size
81
6
H While pinching the release lever, push in the side and end fences until they
are flush against the paper's edges.
I Press down the lock button.
J Adjust the paper size selector in the paper tray according to the paper size.
K Push the paper tray in until it stops.
L Check the paper size on the display panel.
Note
❒ When setting small quantities of copy paper, be careful not to squeeze in
the side fence too much. Paper might not feed in properly if the side fences
are too tight against the paper's edges.
❒ Be sure to set the correct size, otherwise a paper jam might occur.
ASB016S
ASB024S
ASB017S
To Next Page
Loading...
