Copying from the Bypass Tray
31
2
D Select [Paper Type] using {U} or {T}, and then press the {OK} key.
E Select [Thick Paper] using {U} or {T}, and then press the {OK} key.
The “
Programmed” message appears.
F Select the paper size, if required.
G Place the originals, and then press the {Start} key.
H When the copy job is finished, press the {Clear Modes} key to clear the settings.
Note
❒ Printing on thick paper is slower than printing on plain paper.
Reference
p.25 “Loading Paper on the Bypass Tray”
To Next Page
Loading...
