Administrator Tools
65
2
Entering the user name and password
A Enter the user name, and then press the {OK} key.
When [On] or [High Security] is selected for the authentication setting, use the
administrator account name and password. Do not enter the administrator
account name and password when using authentication for individual users
or each search.
Procedures for setting the user name differ depending on server environ-
ment. Check your server environment before making the setting.
Example: Domain Name\User Name, User Name@Domain Name
CN=Name, OU=Department Name, DC=Server Name
B Enter the password, and then press the {OK} key.
The user name and password are required for administrator authentication to
access the LDAP server.
You can also specify the user name and password in this machine's Address
Book to allow individual authentication access to the LDAP server. Use Ad-
ministrator Tools to select the user name and password you want to use.
To Next Page
Loading...
Need help?
General
