2 SafeCom Go Ricoh
D60703-16 21
2.7 SafeCom Go Ricoh web interface
The SafeCom Go Ricoh web interface adheres to the structure and design of the
Ricoh Embedded Web Server. The SafeCom Go Ricoh web interface consists of
two parts, 1) a public part, namely the Information web page and 2) a
password-protected part.
2.7.1 Login to the SafeCom Go Ricoh web interface
1. Open a web browser and enter the printer‘s address followed by
:8080/safecom.
Example: http://172.16.6.55:8080/safecom
Note: Use of JavaScript (Active Scripting) must be enabled.
2. Click Configuration on the left menu to access the SafeCom
Configuration web page. Enter user name (admin) and password (nimda).
Click OK.
2.7.2 Information web page
The Information web page shows version and configuration summary.
1. Click SafeCom on the menu to access the Information web page.
If you have a support issue, use Mail to SafeCom Support. In your email to
support@safecom.eu, describe the issue in enough detail that SafeCom can
reproduce the problem.
Note: When the Information web page is opened, the above information and
additional debug information is copied to the clipboard. The information can
be pasted into an editor such as Notepad or into the body of your e-mail
message by pressing CTRL+ V.
To Next Page
Loading...
Need help?
General
