2 SafeCom Go Ricoh
D60703-16 22
2.7.3 Configuration web page
Use the Configuration web page to configure your SafeCom Go Ricoh MFP, as
described below.
The configuration web page for printers is described in section 2.7.4.
The configuration web page for Ricoh MP 171, MP 201F, and MP 201SPF are
described in 2.7.5.
Under SafeCom Server, click Broadcast to get a complete list of servers to
select from, or enter Group name, SafeCom server TCP port (default is 7500)
and the SafeCom server IP address in Add server. See also 2.8.2.
Note: Broadcast is not available on type B and C devices.
Note: After you click Apply, it takes one minute before the new SafeCom
Server settings take effect. Not waiting long enough may result in a login error
at the printer.
To Next Page
Loading...
Need help?
General
