1 Introduction
D60703-16 5
1 Introduction
1.1 SafeCom Go Ricoh
SafeCom Go Ricoh is the internal solution for Ricoh MFPs. It integrates with the
touch-screen control panel of the Ricoh MFP and offers user authentication by
code and/or card. The Ricoh MFPs are also supported when sold under the
Gestetner, Lanier, Nashuatec, Rex-Rotary and Savin brands.
SafeCom Go Ricoh works together the SafeCom G3 Server software and is
designed to help companies and organizations gain control over their printing
costs and document security. The SafeCom solution can be enhanced with add-
on modules to build customer specific and scalable solutions.
1.2 Requirements
SafeCom Go Ricoh supports all MFPs in Table 1 and printers in Table 2
with the listed JVM version and installed Java VM Card.
SafeCom device license.
MFP must be connected to the network.
If users are to be identified by card a SafeCom ID Device needs to be
installed at the MFP.
Note: During printing activity it is not possible to scan or copy.
To Next Page
Loading...
Need help?
General
