2 SafeCom Go Ricoh
D60703-16 34
2.8 SafeCom Go Ricoh – How to
The following subsections contain step-by-step instructions for some common
administrator tasks.
2.8.1 Get the SafeCom Go Ricoh software
The SafeCom Go Ricoh software files (*.b87) and SafeCom Go Ricoh uninstall
files (*.uin) were installed from the SafeCom CD or can be downloaded using
the SafeCom Administrator function Check for updates.
Alternatively a software package can be downloaded:
1. Download the safecom_go_ricoh_xxx.exe file from the link supplied to
you.
2. Double-click the safecom_go_ricoh_xxx.exe file.
3. Click Next.
4. Choose the destination folder. Click Next.
Normally the destination folder is:
C:\Program Files\SafeCom\SafeComG3\device_software
5. Click Install.
6. Click Finish.
To install software via Ricoh‘s deployment tool, RiDeploy, use the files located
in the Ricoh type specific subfolders, /ricoh_deploy_files_type_?
2.8.2 Specify SafeCom server
1. Open the Configuration web page (2.7.3).
2. To exclude broadcast results from SafeCom servers that do not
belong to a particular SafeCom group in a multi server solution, enter
the Group name.
3. Click Broadcast. It takes approx. 5 seconds for the broadcast results
to populate the SafeCom server IP address list.
To Next Page
Loading...
Need help?
General
