Ricoh Aficio MP C3300 Function Guide

Registering the Default Values of the Scanner's
Initial Display
This section explains how to set defaults for the initial screen, which appears when the machine is turned
on or when settings are cleared or reset.
The following settings can be registered as defaults: Scan Settings, 1 Sided/2 Sided Original, Top to Top/
Top to Bottom, 1 Side/2 Sides for the Last Page, Divide, Original Orientation, File Type, Stamp, Batch/
SADF, Store File, Preview, Reception Notice, and Security (E-mail Encryption and Signature).
1. Make the necessary scan settings on the initial screen.
2. Press the [Program] key.
BAP040S
3. Press [Program as Defaults].
4. Press [Program].
A confirmation screen appears.
5. Press [Yes].
The current settings are registered as defaults, and then the initial screen reappears.
• To restore the initial screen's original default settings, press [Restore Factory Defaults].
Registering the Default Values of the Scanner's Initial Display
179
8

Ricoh Aficio MP C3300 Specifications

General

Print Technology	Laser
Print Speed (Black)	33 ppm
Print Speed (Color)	33 ppm
Max Print Resolution	1200 x 1200 dpi
Duplex Printing	Yes
Scan Technology	CCD
Copy Speed	33 cpm
Max Paper Size	A3
Monthly Duty Cycle	150, 000 pages
Copy Resolution	600 dpi
Multiple Copy	Up to 999 copies
Scan Speed (B&W)	50 ipm
Scan Speed (Color)	50 ipm
Paper Output Capacity (Maximum)	500 sheets
Processor	600 MHz
Memory (Standard)	1 GB
Memory (Maximum)	1.5 GB
Power Consumption (Maximum)	1.5 kW
Functions	Print, Copy, Scan
Zoom	25% - 400%
Scan Destinations	Email, Folder, USB
Paper Weight	60 - 220 gsm
Hard Disk Drive	80 GB
Interface	USB 2.0, Ethernet
PDL (Page Description Language)	PCL6, PostScript 3
Operating Systems Compatibility	Windows, Mac, Linux
Power Source	220 - 240 V