Ricoh Aficio MP C3300 Function Guide

Mac OS X
This section explains how to configure a Mac OS X to use EtherTalk, USB and TCP/IP.
Follow the procedure below to configure Mac OS X 10.3.8. If you are not using Mac OS X 10.3.8, see
the manual of the Mac OS X you are using for details.
• For Mac OS X 10.1 or higher.
• The PPD files are stored in the following folder on the CD-ROM.
• Mac OS X: MacOSX PPD Installer
Installing the PPD Files
Follow the procedure below to install a PPD file to print from Mac OS X.
• You need an administrator name and a password (phrase). For details, consult your network
administrator.
1. Insert the CD-ROM into the CD-ROM drive.
2. Double-click the CD-ROM drive icon.
3. Double-click the [Mac OS X] folder.
4. Double-click the MacOSX PPD Installer folder.
5. Double-click the installer icon.
6. Follow the instructions on the screen.
Setting Up the PPD File
1. Start Printer Setup Utility.
2. Click [Add].
Mac OS X 10.4 or later
Click a printer that has “AppleTalk” indicated in the “Connection” column.
If the zone is set, click [More Printers...], and then select the zone from the second pop-up menu.
Other Mac OS X
Click [AppleTalk] on the first pop-up menu.
If the zone is set, select the zone from the second pop-up menu.
Mac OS X
61
2

Ricoh Aficio MP C3300 Specifications

General

Print Technology	Laser
Print Speed (Black)	33 ppm
Print Speed (Color)	33 ppm
Max Print Resolution	1200 x 1200 dpi
Duplex Printing	Yes
Scan Technology	CCD
Copy Speed	33 cpm
Max Paper Size	A3
Monthly Duty Cycle	150, 000 pages
Copy Resolution	600 dpi
Multiple Copy	Up to 999 copies
Scan Speed (B&W)	50 ipm
Scan Speed (Color)	50 ipm
Paper Output Capacity (Maximum)	500 sheets
Processor	600 MHz
Memory (Standard)	1 GB
Memory (Maximum)	1.5 GB
Power Consumption (Maximum)	1.5 kW
Functions	Print, Copy, Scan
Zoom	25% - 400%
Scan Destinations	Email, Folder, USB
Paper Weight	60 - 220 gsm
Hard Disk Drive	80 GB
Interface	USB 2.0, Ethernet
PDL (Page Description Language)	PCL6, PostScript 3
Operating Systems Compatibility	Windows, Mac, Linux
Power Source	220 - 240 V