Ricoh Aficio MP C3300 Function Guide

9. Troubleshooting
This chapter describes what to do if the machine does not function properly.
Authentication Does Not Work Properly
This section explains what to do if a user cannot operate the machine because of a problem related to user
authentication. Refer to this section if a user comes to you with such a problem.
A Message Appears
This section explains how to deal with problems if a message appears on the screen during user
authentication.
The most common messages are explained. If some other message appears, deal with the problem
according to the information contained in the message.
Messages Cause Solutions
"You do not have the privileges
to use this function."
The authority to use the function
is not specified.
• If this appears when trying
to use a function: The
function is not specified in
the Address Book
management setting as
being available. The user
administrator must decide
whether to authorize use of
the function and then assign
the authority.
• If this appears when trying
to specify a default setting:
The administrator differs
depending on the default
settings you wish to specify.
Using the list of settings, the
administrator responsible
must decide whether to
authorize use of the
function.
227
9

Ricoh Aficio MP C3300 Specifications

General

Print Technology	Laser
Print Speed (Black)	33 ppm
Print Speed (Color)	33 ppm
Max Print Resolution	1200 x 1200 dpi
Duplex Printing	Yes
Scan Technology	CCD
Copy Speed	33 cpm
Max Paper Size	A3
Monthly Duty Cycle	150, 000 pages
Copy Resolution	600 dpi
Multiple Copy	Up to 999 copies
Scan Speed (B&W)	50 ipm
Scan Speed (Color)	50 ipm
Paper Output Capacity (Maximum)	500 sheets
Processor	600 MHz
Memory (Standard)	1 GB
Memory (Maximum)	1.5 GB
Power Consumption (Maximum)	1.5 kW
Functions	Print, Copy, Scan
Zoom	25% - 400%
Scan Destinations	Email, Folder, USB
Paper Weight	60 - 220 gsm
Hard Disk Drive	80 GB
Interface	USB 2.0, Ethernet
PDL (Page Description Language)	PCL6, PostScript 3
Operating Systems Compatibility	Windows, Mac, Linux
Power Source	220 - 240 V