EasyManuals Logo

Ricoh Aficio MP C3300 Function Guide

Ricoh Aficio MP C3300
1044 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #549 background imageLoading...
Page #549 background image
Configuring IEEE 802.1X
IEEE 802.1X can be configured using Web Image Monitor's administrator mode. You can select four types
of EAP authentication method: EAP-TLS, LEAP, EAP-TTLS and PEAP. Note that each EAP authentication
method has different configuration settings and authentication procedures.
Types and requirements of certificates are as follows:
If a certificate is required, configure all settings after installing the certificate.
EAP Types Requiring a “Site Certificate”
EAP-TLS, EAP-TTLS, PEAP (Necessary except LEAP)
EAP Types Requiring a “Site Certificate” and a “Device Certificate”
EAP-TLS, PEAP (Phase 2 is for TLS only)
To set IEEE 802.1X, you must enable SSL. For details about setting SSL configuration, see “Protection
Using Encryption”, Security Reference.
To set IEEE 802.1X, you must use Web Image Monitor.
Installing a Site Certificate
1. Access the authentication server and obtain the CA certificate.
Methods of obtaining certificates differ according to the operating system you are using.
2. Log on to Web Image Monitor in the administrator mode.
3. Click [Configuration].
4. [Site Certificate] in the “Security” area.
5. Click [Browse] on the “Site Certificate to Import” window, and then select the CA certificate
you obtained.
6. Click [Import].
7. Check that the imported certificate's [Status] shows “Trustworthy”.
If [Site Certificate Check] shows [Active], and the [Status] of the certificate shows [Untrustworthy],
communication might not be possible.
8. Click [OK].
9. Click [Logout].
10. Quit the Web Image Monitor.
Configuring IEEE 802.1X
331
7

Table of Contents

Other manuals for Ricoh Aficio MP C3300

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Ricoh Aficio MP C3300 and is the answer not in the manual?

Ricoh Aficio MP C3300 Specifications

General IconGeneral
Print TechnologyLaser
Print Speed (Black)33 ppm
Print Speed (Color)33 ppm
Max Print Resolution1200 x 1200 dpi
Duplex PrintingYes
Scan TechnologyCCD
Copy Speed33 cpm
Max Paper SizeA3
Monthly Duty Cycle150, 000 pages
Copy Resolution600 dpi
Multiple CopyUp to 999 copies
Scan Speed (B&W)50 ipm
Scan Speed (Color)50 ipm
Paper Output Capacity (Maximum)500 sheets
Processor600 MHz
Memory (Standard)1 GB
Memory (Maximum)1.5 GB
Power Consumption (Maximum)1.5 kW
FunctionsPrint, Copy, Scan
Zoom25% - 400%
Scan DestinationsEmail, Folder, USB
Paper Weight60 - 220 gsm
Hard Disk Drive80 GB
InterfaceUSB 2.0, Ethernet
PDL (Page Description Language)PCL6, PostScript 3
Operating Systems CompatibilityWindows, Mac, Linux
Power Source220 - 240 V

Related product manuals