EasyManuals Logo

Ricoh Aficio MP C3300 Function Guide

Ricoh Aficio MP C3300
1044 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #751 background imageLoading...
Page #751 background image
4. Click [Configuration], and then click [Network Security] under "Security".
5. Set the desired protocols to active/inactive (or open/close).
6. Click [OK].
7. Click [OK].
8. Click [Logout].
To disable SMTP from Web Image Monitor, specify a protocol other than SMTP as the mail receiving
protocol. See Web Image Monitor help for instructions to configure this setting.
For details about how to configure telnet, see "Using telnet", Network and System Settings Guide. For
details about how to configure SmartDeviceMonitor for Admin, see SmartDeviceMonitor for Admin
help. For details about how to configure Web SmartDeviceMonitor, see Web SmartDeviceMonitor
user manual.
Specifying Network Security Level
This can be specified by the network administrator. This setting lets you change the security level to limit
unauthorized access. You can make network security level settings on the control panel, as well as Web
Image Monitor. However, the protocols that can be specified differ.
Set the security level to [Level 0], [Level 1], or [Level 2].
Select [Level 2] for maximum security to protect confidential information. Make this setting when it is
necessary to protect confidential information from outside threats.
Select [Level 1] for moderate security to protect important information. Use this setting if the machine is
connected to the office local area network (LAN).
Select [Level 0] for easy use of all the features. Use this setting when you have no information that needs
to be protected from outside threats.
For details about logging on and logging off with administrator authentication, see "Logging on Using
Administrator Authentication", "Logging off Using Administrator Authentication".
p.34 "Logging on Using Administrator Authentication"
p.35 "Logging off Using Administrator Authentication"
Making Settings Using the Control Panel
1. Press the [User Tools/Counter] key.
2. Press [System Settings].
3. Press [Administrator Tools].
Preventing Unauthorized Access
165
7

Table of Contents

Other manuals for Ricoh Aficio MP C3300

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Ricoh Aficio MP C3300 and is the answer not in the manual?

Ricoh Aficio MP C3300 Specifications

General IconGeneral
Print TechnologyLaser
Print Speed (Black)33 ppm
Print Speed (Color)33 ppm
Max Print Resolution1200 x 1200 dpi
Duplex PrintingYes
Scan TechnologyCCD
Copy Speed33 cpm
Max Paper SizeA3
Monthly Duty Cycle150, 000 pages
Copy Resolution600 dpi
Multiple CopyUp to 999 copies
Scan Speed (B&W)50 ipm
Scan Speed (Color)50 ipm
Paper Output Capacity (Maximum)500 sheets
Processor600 MHz
Memory (Standard)1 GB
Memory (Maximum)1.5 GB
Power Consumption (Maximum)1.5 kW
FunctionsPrint, Copy, Scan
Zoom25% - 400%
Scan DestinationsEmail, Folder, USB
Paper Weight60 - 220 gsm
Hard Disk Drive80 GB
InterfaceUSB 2.0, Ethernet
PDL (Page Description Language)PCL6, PostScript 3
Operating Systems CompatibilityWindows, Mac, Linux
Power Source220 - 240 V

Related product manuals