Ricoh Aficio MP C3300 Function Guide

• WPA Encryption Method
Select either [TKIP] or [CCMP (AES)].
• WPA Authent. Method
Select either [WPA-PSK], [WPA], [WPA2-PSK], or [WPA2].
If you selected [WPA-PSK] or [WPA2-PSK], enter the Pre-Shared Key ("PSK") of 8- 63
characters in ASCII code.
When [WPA] or [WPA2] are selected, authentication settings and certificate installation
settings are required. For details about setting methods, see "Configuring IEEE 802.1X
(WPA/WPA2)".
Wireless LAN Signal
When using in infrastructure mode, you can check the machine's radio wave status using the control
panel.
Radio wave status is displayed when you press [Wireless LAN Signal].
Restore Factory Defaults
You can return the wireless LAN settings to their defaults.
• p.17 "Accessing User Tools"
• p.331 "Configuring IEEE 802.1X"
Print List
This section describes how to print the configuration page.
You can check items related to the network environment.
The configuration page shows the current network settings and network information.
1. Press the [User Tools/Counter] key.
2. Press [System Settings].
Interface Settings
39
1

Ricoh Aficio MP C3300 Specifications

General

Print Technology	Laser
Print Speed (Black)	33 ppm
Print Speed (Color)	33 ppm
Max Print Resolution	1200 x 1200 dpi
Duplex Printing	Yes
Scan Technology	CCD
Copy Speed	33 cpm
Max Paper Size	A3
Monthly Duty Cycle	150, 000 pages
Copy Resolution	600 dpi
Multiple Copy	Up to 999 copies
Scan Speed (B&W)	50 ipm
Scan Speed (Color)	50 ipm
Paper Output Capacity (Maximum)	500 sheets
Processor	600 MHz
Memory (Standard)	1 GB
Memory (Maximum)	1.5 GB
Power Consumption (Maximum)	1.5 kW
Functions	Print, Copy, Scan
Zoom	25% - 400%
Scan Destinations	Email, Folder, USB
Paper Weight	60 - 220 gsm
Hard Disk Drive	80 GB
Interface	USB 2.0, Ethernet
PDL (Page Description Language)	PCL6, PostScript 3
Operating Systems Compatibility	Windows, Mac, Linux
Power Source	220 - 240 V