Ricoh Aficio MP C3300 Function Guide

Switching to the WSD Scanner Screen
This section explains how to switch from the screen that is currently displayed to the WSD scanner screen.
When the E-mail screen, Scan to Folder screen, or network delivery screen is displayed, you can use the
following procedure to switch to the WSD scanner screen.
1. Press [Swtch Dest.List].
The [Switch Destination List] screen appears.
2. Press [WSD], and then press [OK].
The WSD scanner screen appears.
• You cannot switch the screen while e-mail or other destinations are being specified. To clear a
specified destination, display the destination in the destination field of each screen, and then
press the [Clear/Stop] key.
• If you are not using the network delivery function, [WSD Dest.] is displayed instead of [Swtch
Dest.List]. Press [WSD Dest.] to switch to the WSD scanner screen.
• [Swtch Dest.List] or [WSD Dest.] is displayed only when the WSD scanner function is set to [On]
using Web Image Monitor. For details about making this setting, see "Preparation for Sending
files Using WSD".
• p.78 "Preparation for Sending Files Using WSD"
Switching to the WSD Scanner Screen
85
3

Ricoh Aficio MP C3300 Specifications

General

Print Technology	Laser
Print Speed (Black)	33 ppm
Print Speed (Color)	33 ppm
Max Print Resolution	1200 x 1200 dpi
Duplex Printing	Yes
Scan Technology	CCD
Copy Speed	33 cpm
Max Paper Size	A3
Monthly Duty Cycle	150, 000 pages
Copy Resolution	600 dpi
Multiple Copy	Up to 999 copies
Scan Speed (B&W)	50 ipm
Scan Speed (Color)	50 ipm
Paper Output Capacity (Maximum)	500 sheets
Processor	600 MHz
Memory (Standard)	1 GB
Memory (Maximum)	1.5 GB
Power Consumption (Maximum)	1.5 kW
Functions	Print, Copy, Scan
Zoom	25% - 400%
Scan Destinations	Email, Folder, USB
Paper Weight	60 - 220 gsm
Hard Disk Drive	80 GB
Interface	USB 2.0, Ethernet
PDL (Page Description Language)	PCL6, PostScript 3
Operating Systems Compatibility	Windows, Mac, Linux
Power Source	220 - 240 V