For details about logging in and logging out with administrator authentication, see "Logging in Using
Administrator Authentication" and "Logging out Using Administrator Authentication".
1. Press the [User Tools/Counter] key.
2. Press [System Settings].
3. Press [Administrator Tools].
4. Press [Extended Security].
If this item is not visible, press [ Next] to display more settings.
5. Press [On] for "Restrict Use of Destinations".
If you set "Restrict Use of Destinations" to [On], "Restrict Adding of User Destinations" will not appear.
6. Press [OK].
7. Press the [User Tools/Counter] key.
• p.221 "Specifying the Extended Security Functions"
• p.33 "Logging in Using Administrator Authentication"
•
p.34 "Logging out Using Administrator Authentication"
5. Securing Information Sent over the Network or Stored on Hard Disk
108
To Next Page
Loading...
