Limiting Machine Operations to Customers Only
The machine can be set so that operation is impossible without administrator authentication.
The machine
can be set to prohibit operation without administrator authentication and also prohibit remote
registration in the Address Book by a service representative.
We maintain strict security when handling customers' data. Administrator authentication prevents us from
operating the machine without administrator permission.
Use the following settings.
• Service Mode Lock
Settings
This can be specified by the machine administrator.
For details about logging in and logging out with administrator authentication, see "Logging in Using
Administrator Authentication" and "Logging out Using Administrator Authentication".
Service Mode Lock
This can
be specified by the machine administrator. Service mode is used by a service representative
for inspection or repair. If you set "Service Mode Lock" to [On], service mode cannot be used unless
the machine administrator logs on to the machine and cancels the service mode lock to allow the
service representative to operate the machine for inspection and repair. This ensures that the inspection
and repair are done under the supervision of the machine administrator.
• p.33 "Logging in Using Administrator Authentication"
• p.34 "Logging out Using Administrator Authentication"
Specifying Service Mode Lock
1. Press the [User Tools/Counter] key.
2. Press [System Settings].
3. Press [Administrator Tools].
Limiting Machine Operations to Customers Only
227
To Next Page
Loading...
