Network
The settings available to the user depend on whether or not administrator authentication is enabled.
If administrator authentication is enabled, the settings available to the user depend on whether or not
"Available Settings" has been specified.
User privileges are as follows:
• Abbreviations in the table heads
Not Specified = Authorized user when "Available Settings" have not been specified.
Specified = Authorized user when "Available Settings" have been specified.
•
Abbreviations in the table columns
R/W (Read and Write) = Both reading and modifying the setting are available.
R (Read) = Reading only.
N/A (Not Applicable) = Neither reading nor modifying the setting is available.
• Settings that are not in the list can only be viewed, regardless of whether "Available Settings" has
been specified.
IPv4
Settings Not Specified Specified
Host Name R/W R
DHCP R/W R
Domain Name R/W R
IPv4 Address R/W R
Subnet Mask R/W R
DDNS R/W R
WINS R/W R
Primary WINS Server R/W R
Secondary WINS Server R/W R
Scope ID R/W R
Default Gateway Address R/W R
10. Appendix
318
To Next Page
Loading...
