• To log out, do one of the following:
• Press the operation switch.
•
Press the [Energy Saver] key after jobs are completed.
• Press the [Clear/Stop] key and the [Clear Modes] key at the same time.
Logging in Using the Printer Driver
When User Code Authentication is set, specify a user code in the printer driver's printing preferences dialog
box. For details, see the printer driver Help.
If Basic, Windows, LDAP or Integration Server Authentication is Specified
When Basic Authentication, Windows Authentication, LDAP Authentication or Integration Server
Authentication is set, the following screen appears.
Enter your login user name and password.
Logging in Using the Control Panel
Use the following procedure to log in if Basic Authentication, Windows Authentication, LDAP
Authentication, or Integration Server Authentication is enabled.
1. Press [Login].
2. Enter the login user name, and then press [OK].
3. Enter the login password, and then press [OK].
The message, "Authenticating... Please wait." appears.
When the authentication is successful, a screen showing the corresponding function is displayed.
3. Configuring User Authentication
82
To Next Page
Loading...
Need help?
General
