6. Press [Exit].
7. Press the [User Tools/Counter] key.
Using Remote Communication Gate S to Manage Log Files
For details about using Remote Communication Gate S to manage Log Files, see the manual supplied with
Remote Communication Gate S.
Using Web Image Monitor to Manage Log Files
This can be specified by the machine administrator.
For details about logging in and logging out with administrator authentication, see "Logging in Using
Administrator Authentication" and "Logging out Using Administrator Authentication".
You can specify the types of log to store in the machine and the log collection level. You can also encrypt,
bulk delete, or download log files.
• p.33 "Logging in Using Administrator Authentication"
• p.34 "Logging out Using Administrator Authentication"
Specifying log collect settings
Specify collection log settings. The Log collection levels are listed below.
Job Log Collect Level
Level 1
User Settings
Access Log Collect Level
Level 1
Level 2
User Settings
1. Open a Web browser.
2. Enter "http://(the machine's IP address or host name)/" in the address bar.
When entering an IPv4 address, do not begin segments with zeros. For example: If the address is
"192.168.001.010", you must enter it as "192.168.1.10" to connect to the machine.
The top page of Web Image Monitor appears.
Managing Log Files
147
To Next Page
Loading...
