Ricoh aficio MP W3601 User Manual (English)

Other manuals for Ricoh aficio MP W3601

Questions and Answers:

P
patrickthomasSep 7, 2025
What to do if Ricoh All in One Printer failed to obtain URL?
- N
  nreynoldsSep 7, 2025
  If your Ricoh All in One Printer fails to obtain a URL, it could be due to the following reasons: * The machine cannot connect to the server or cannot establish communication. Ensure that the server's settings, such as the IP address and host name, are correctly specified on the machine. Also, verify that the host name of the UA Server is correctly specified. * The machine is connected to the server, but the UA service is not responding properly. Ensure that the UA service is correctly specified. * SSL is not specified correctly on the server. Specify SSL using Authentication Manager. * Server authentication failed. Make sure server authentication is specified correctly on the machine.
M
Maria RossAug 23, 2025
How to fix black or white streaks on Ricoh Printer copies?
- S
  Sabrina MitchellAug 23, 2025
  Black or white streaks on copies from your Ricoh Printer can appear if the original is dusty, or the exposure glass or platen plate is dirty. Clean the original, especially if it's hand-drawn, film, translucent paper, or a very long original. Also, clean the exposure glass or platen plate.
B
brittanywilliamsAug 25, 2025
What to do if my Ricoh Printer shows 'Original is being scanned by another function'?
- R
  rtownsendAug 25, 2025
  This message on your Ricoh Printer means that a function other than the copier, like the Document Server, is currently in use. To resolve this, cancel the job in progress. For example, press [Exit], then press the [Document Server] key, and then press the [Clear/Stop] key. When the message "The Clear / Stop key was pressed. Are you sure you want to stop scanning?" appears, press [Stop].
S
Sally CallahanAug 27, 2025
What to do if my Ricoh Printer cannot detect original size?
- D
  Dana HughesAug 27, 2025
  If your Ricoh Printer cannot detect the original size, it may be because the original is not placed correctly or the machine is unable to detect the size. Ensure the originals are placed correctly. If the issue persists, manually select a paper tray without using [Auto Paper Select], and specify a reproduction ratio without using [Auto Reduce / Enlarge].
M
Michael BullockAug 27, 2025
How to fix Ricoh All in One Printer 'Failed to decrypt password'?
- S
  Shelby WilkinsAug 27, 2025
  If your Ricoh All in One Printer displays a 'Failed to decrypt password' error, consider the following: 1. Ensure that the password is entered correctly. 2. If 'Restrict Use of Simple Encryption' is enabled by the administrator, use the encryption key if it has been specified in the driver. 3. Verify that the encryption key is correctly specified on the driver.
C
Cheryl WashingtonSep 17, 2025
How to log in as a general user from the application's login screen on Ricoh All in One Printer?
- C
  Cynthia LloydSep 17, 2025
  Only the administrator has login privileges on this screen. Log in as a general user from the application's login screen.
J
Jonathan MaloneSep 14, 2025
What to do if Kerberos authentication failed on Ricoh All in One Printer?
- A
  Anna MurphySep 14, 2025
  If Kerberos authentication failed on your Ricoh All in One Printer, make sure that the server is functioning properly and that the security module is installed.
A
Allison HernandezSep 15, 2025
How to solve SSL settings issues on Ricoh All in One Printer?
- N
  nicholsondeborahSep 15, 2025
  Make sure the SSL settings on the authentication server and the machine match.
G
George HartmanSep 6, 2025
Why Ricoh All in One Printer authentication has failed?
- A
  alexanderpottsSep 6, 2025
  Authentication may have failed on your Ricoh All in One Printer due to several reasons: * The login user name or login password entered might be incorrect. Contact your user administrator to verify the correct credentials. * The maximum number of registered users in the Address Book might have been reached. Try deleting unnecessary user addresses. * A network or server error might have occurred when using Windows Authentication, LDAP Authentication, or Integration Server Authentication. Confirm the network with your LAN administrator, and check for any error codes.
V
Vanessa RodriguezSep 3, 2025
What to do if my Ricoh Printer shows 'File being stored exceeded max. number of pages per file'?
- K
  Kyle BryantSep 3, 2025
  This message on your Ricoh Printer indicates that the scanned originals have too many pages to store as one document. Press [Exit], and then store again with an appropriate number of pages.