Ricoh aficio MP W3601 - Deleting an FTP Folder

1. Press [SMB] or [NCP].
A confirmation message appears.
2. Press [Yes].
Changing the protocol will clear all settings made under the previous protocol.
3. Enter each item again.
Changing the registered FTP folder
This section describes how to change the registered FTP folder.
1. Press [Change] under "Port Number".
2. Enter the new port number, and then press the [ ] key.
3. Press [Change] under "Server Name".
4. Enter the new server name, and then press [OK].
5. Press [Change] under "Path".
6. Enter the new path, and then press [OK].
Deleting an FTP Folder
This section describes how to delete the registered FTP folder.
1. Press the [User Tools/Counter] key.
Registering Folders
231
5