File Transfer
This section describes how to make File Transfer settings using utilities.
Change settings by using Web Image Monitor and telnet.
[File Transfer] [Delivery Option]
• Web Image Monitor: Cannot be used for specifying the setting.
• telnet: Cannot be used for specifying the setting.
[File Transfer] [Capture Server IPv4 Address]
• Web Image Monitor: Cannot be used for specifying the setting.
• telnet: Cannot be used for specifying the setting.
[File Transfer] [SMTP Server]
• Web Image Monitor: Can be used for specifying the setting.
• telnet: Cannot be used for specifying the setting.
[File Transfer] [SMTP Authentication]
• Web Image Monitor: Can be used for specifying the setting.
• telnet: Cannot be used for specifying the setting.
[File Transfer] [POP before SMTP]
• Web Image Monitor: Can be used for specifying the setting.
• telnet: Cannot be used for specifying the setting.
[File Transfer] [Reception Protocol] [POP3]
• Web Image Monitor: Can be used for specifying the setting.
• telnet: Cannot be used for specifying the setting.
[File Transfer] [Reception Protocol] [IMAP4]
• Web Image Monitor: Can be used for specifying the setting.
• telnet: Cannot be used for specifying the setting.
[File Transfer] [Reception Protocol] [SMTP]
• Web Image Monitor: Can be used for specifying the setting.
• telnet: Cannot be used for specifying the setting.
[File Transfer] [POP3 / IMAP4 Settings]
• Web Image Monitor: Can be used for specifying the setting.
• telnet: Cannot be used for specifying the setting.
[File Transfer] [Administrator's E-mail Address]
• Web Image Monitor: Can be used for specifying the setting.
Using Utilities to Make Network Settings
97
To Next Page
Loading...
