8. Press [Change], and then enter the new user code using the number keys.
9. Press the [ ] key.
10. To change the available functions, press [ Next] twice.
11. Press the key to select the functions to enable them.
Press the key to highlight it, and then the function is enabled. To cancel a selection, press the highlighted
key.
12. Press [OK].
13. Press [Exit].
14. Press the [User Tools/Counter] key.
• To change the name, key display and title, see "Registering Names".
• p.204 "Registering Names"
Deleting a User Code
This section describes how to delete a user code.
• After clearing the user code, the counter is automatically cleared.
1. Press the [User Tools/Counter] key.
Authentication Information
211
To Next Page
Loading...
