13. Press the [User Tools/Counter] key.
• To change the name, key display and title, see "Registering Names".
• p.204 "Registering Names"
Changing the protocol
This section describes how to change the protocol.
1. Press [FTP] or [NCP].
A confirmation message appears.
2. Press [Yes].
Changing the protocol will clear all settings made under the previous protocol.
3. Enter each item again.
Deleting an SMB Registered Folder
This section describes how to delete the registered SMB folder.
1. Press the [User Tools/Counter] key.
5. Registering Addresses and Users for Scanner Functions
226
To Next Page
Loading...
