Format of On-demand E-mail Messages
To use "on-demand e-mail notification", you need to send a request e-mail with a particular format to the
machine.
Using your mail software, enter the following:
Format of the request e-mail
Item Description
To Enter the specified e-mail address in "E-mail Notification E-mail
Address".
Subject Enter "requeststatus".
From Specify a valid mail address. The device information will be sent to the
address specified here.
• A mail message must be within 1 MB in size.
• E-mail may be incomplete if sent immediately after power on.
• The subject is not case sensitive.
• The body of a request e-mail has no meaning. Any text written in the e-mail body is ignored.
Machine Status Notification by E-Mail
131
To Next Page
Loading...
