11. Press [OK].
12. Press [Exit].
13. Press the [User Tools/Counter] key.
• You can enter a one-to eight-digit user code.
• To register the name, see "Registering Names".
• p.204 "Registering Names"
Changing a User Code
This section describes how to change a user code.
• Even if you change a user code, the counter value will not be cleared.
1. Press the [User Tools/Counter] key.
2. Press [System Settings].
3. Press [Administrator Tools].
4. Press [Address Book Management].
5. Check that [Program / Change] is selected.
6. Select the user whose user code you want to change.
Press the name key, or enter the registered number using the number keys. You can search by the
registered name, folder name, or e-mail address.
7. Press [Auth. Info].
5. Registering Addresses and Users for Scanner Functions
210
To Next Page
Loading...
