Menu User Tool Setting Requirements
Interface Settings/Network Host Name As required
Interface Settings/Network
IEEE 802.1X Authentication for
Ethernet
As required
File Transfer Delivery Option Necessary
File Transfer Scanner Resend Interval Time As required
File Transfer Number of Scanner Resends As required
• For the Effective Protocol setting, check that the protocol you want to use is set to [Active].
• [LAN Type] is displayed when the wireless LAN interface board is installed. If both Ethernet and
wireless LAN are connected, the selected interface takes precedence.
• If Delivery Option is set to [On], check that IPv4 Address is specified.
• p.31 "Interface Settings"
• p.39 "File Transfer"
Wireless LAN
This section lists the settings required for delivering data to the network with a wireless LAN connection.
For details about how to specify the settings, see "Interface Settings" and "File Transfer".
Menu User Tool Setting Requirements
Interface Settings/Network Machine IPv4 Address Necessary
Interface Settings/Network IPv4 Gateway Address As required
Interface Settings/Network Machine IPv6 Address As required
Interface Settings/Network IPv6 Gateway Address As required
Interface Settings/Network
IPv6 Stateless Address
Autoconfiguration
As required
Interface Settings/Network DNS Configuration As required
Interface Settings/Network DDNS Configuration As required
2. Connecting the Machine
84
To Next Page
Loading...
