8. Enter the number of times that you want to overwrite using the number keys, and then press
[ ].
9. Press [Erase].
10. Press [Yes].
11. When overwriting is completed, press [Exit], and then turn off the main power.
Before turning the power off, see "Turning On the Power", About This Machine.
• Should the main power switch be turned off before "Erase All Memory" is completed, overwriting will
continue once the main power switch is turned back on.
•
If an error occurs before overwriting is completed, turn off the main power. Turn it on again, and then
repeat from step 2.
• If you specify to both overwrite and encrypt the data, the data will all be encrypted.
• p.33 "Logging in Using Administrator Authentication"
• p.34 "Logging out Using Administrator Authentication"
•
p.129 "Methods of Overwriting"
Suspending Erase All Memory
The overwriting process can be suspended temporarily.
5. Securing Information Sent over the Network or Stored on Hard Disk
134
To Next Page
Loading...
