Item Content
Parts Number Firmware module part number.
Version Firmware version.
Machine Data Encryption Key
Operation
Indicates the type of encryption key operation performed:
"Back Up
Machine Data Encryption Key" indicates an encryption
key backup was performed.
"Restore Machine Data Encryption Key" indicates an encryption
key was restored.
"Clear NVRAM" indicates the NVRAM was cleared.
"Start Updating Machine Data Encryption Key" indicates an
encryption key update was started.
"Finish Updating Machine Data Encryption Key" indicates an
encryption key update was finished.
Machine Data Encryption Key
Type
Identifies the type of the encryption key as "Encryption Key for
Hard Disk", "Encryption Key for NVRAM", or "Device
Certificate".
Validity Error File Name Indicates the name of the file in which a validity error was
detected.
Access Result Indicates the results of logged operations: "Completed" indicates
an operation completed successfully; "Failed" indicates an
operation completed unsuccessfully.
Job log information items
Input information
Item Content
Source Indicates the source of the job file:
"Scan File" indicates the job file was scanned in; "Stored File"
indicates the job file was stored on the hard disk; "Printer"
indicates the job file was sent from the printer driver; "Report"
indicates the job file was a printed report.
Start Date/Time Dates and times "Scan File", "Received File" and "Printer"
operations started.
This is Item 52 of the CSV file.
6. Managing Access to the Machine
168
To Next Page
Loading...
