Ricoh aficio MP W3601 - Page 176

Protocol Port Setting Method When Disabled
HTTP TCP:80
• Web Image Monitor
• telnet
• SmartDeviceMonitor
for Admin
Functions that require
HTTP cannot be used.
Cannot print using IPP
on port 80.
HTTPS TCP:443
• Web Image Monitor
• telnet
•
SmartDeviceMonitor
for Admin
Functions that require
HTTPS cannot be used.
@Remote cannot be
used.
You can also make
settings to require SSL
transmission using the
control panel or Web
Image Monitor.
SMB TCP:139
• Control Panel
• Web Image Monitor
•
telnet
• SmartDeviceMonitor
for Admin
• Remote
Communication Gate S
SMB printing functions
cannot be used.
NBT
UDP:137
UDP:138
• telnet
SMB printing functions
via TCP/IP, as well as
NetBIOS designated
functions on the WINS
server cannot be used.
SNMPv1,v2 UDP:161
• Web Image Monitor
• telnet
•
SmartDeviceMonitor
for Admin
• Remote
Communication Gate S
Functions that require
SNMPv1, v2 cannot be
used.
Using the control panel,
Web Image Monitor or
telnet, you can specify
that SNMPv1, v2
settings are read-only,
and cannot be edited.
7. Enhanced Network Security
174
7