3. Click the link to the administrator's page in the header area on the upper-right hand of the
screen.
To change administrative settings (GL/2 & TIFF Initial Configuration), click .
To collect system logs, click .
4. Enter the administrator password, and then click [OK].
5. Make settings as desired.
• When logging in to Web Printing Tool, the default password is set as "admin". To differentiate from
the administrator
password set in the machine, use a password unique to Web Printing Tool for login.
• If the password authentication fails three times in a row, you will be returned to the Web Printing
Tool top page. To return to the login page again, click the link in the header area on the upper-right
hand of the screen.
• The password can be changed in "Change Administrator Password:" under the "Administrator
Password" tab on the administrator settings (GL/2 & TIFF Initial Configuration) screen. Click [On] to
activate the password entry fields. The password must be 4 to 8 characters long.
• For details about Web Printing Tool, see the Web Printing Tool Help.
2. Configuring Administrator Authentication
36
To Next Page
Loading...
