7. Press [OK].
8. Press the [User Tools/Counter] key.
A confirmation message appears.
If you press [Yes], you will be automatically logged out.
• p.143 "Limiting Available Functions"
Selecting Simple (Limitation)
If you select [Simple (Limitation)], you can specify clients for which printer job authentication is not required.
Specify [USB:
Simple] and the clients' IPv4 address range in which printer job authentication is not required.
Specify this setting if you want to print using unauthenticated printer drivers or without any printer driver.
Authentication is required for printing with non-specified devices.
If you select [Simple (Limitation)], you can print even with unauthenticated printer drivers or devices. Specify
this setting if you want to print with a printer driver or device that cannot be identified by the machine or if
you do not require authentication for printing. However, note that, because the machine does not require
authentication in this case, it may be used by unauthorized users.
1. Press [Simple (Limitation)].
2. Press [Change].
LDAP Authentication
69
To Next Page
Loading...
