Removing Misfed Paper
130
9
C Close the front cover with both hands carefully.
Note
❒ Do not pull out the paper tray (Tray 1).
❒ If paper is jammed in Tray 2, but it is difficult to locate, pull out Tray 2 to
remove it. After removing the paper, carefully push Tray 2 all the way back
inside the printer.
❒ When closing the front cover, push the upper side of the cover firmly. After
closing the cover, check that the error is cleared.
When “Remove Misfeed Tray 2” Appears
“Remove Misfeed Tray 2” appears when a paper jam has occurred in Tray 2.
Open the front cover and remove the paper following the same procedure as for Tray 1.
Reference
For details about the procedure, see p.129 “When “Remove Misfeed Tray 1”
Appears”
When “Paper Misfeed Duplex Unit” Appears
“Paper Misfeed Duplex Unit” appears when a paper jam has occurred in the
duplex unit.
Open the front cover and remove the paper.
A Pull Front Cover Open Lever, and then open the front cover with both
hands carefully.
ASI072S
ASI025S
To Next Page
Loading...
