65
6. Monitoring and Configuring
the Printer
Using Web Image Monitor
Using Web Image Monitor, you can check the printer status and change settings.
❖ Available operations
The following operations can be remotely performed using Web Image Mon-
itor from a client computer:
• Display printer status and supply information
• Displaying the counter information
• Making settings for paper loaded into each input tray
• Making input tray settings
• Printing a list of printer configuration
• Making network protocol settings
❖ Configuring the printer
To perform the operations from Web Image Monitor, TCP/IP is required.
After the printer is configured to use TCP/IP, operations from Web Image
Monitor become available.
❖ Recommended Web browser
•Windows:
Internet Explorer 5.5 SP2 or higher
Firefox 1.0 or higher
•Mac OS X:
Firefox 1.0 or higher
Safari 1.0, 1.2, 2.0 or higher
Note
❒ If the previous versions of the Web browser above are used or JavaScript and
cookies are not enabled with the Web browser used, display and operation
problems may occur.
❒ If you are using a proxy server, change the Web browser settings. Contact
your network administrator for information about the settings.
❒ The previous page may not appear even after the back button of the Web
browser is clicked. If this happens, click the refresh button of the Web browser.
❒
Updating the printer information is not automatically performed. Click
[
Refresh
]
in the main area to update the printer information.
❒ We recommend using Web Image Monitor in the same network.
❒ You cannot access the printer from outside the firewall.
❒ When using the printer under DHCP, the IPv4 address may be automatically
changed by the DHCP server settings.
❒ If the HTTP port is disabled, connection to the printer using the printer's URL
cannot be established.
To Next Page
Loading...
