Paper Recommendations
37
5
Paper Recommendations
Loading Paper
Important
❒ Do not use ink-jet printer paper because it may stick to the fusing unit and
cause a paper misfeed.
❒ Do not load OHP transparencies. Load translucent media only.
❒ Set the paper as described below.
• Tray 1: Print side facing up
• Bypass Tray: Print side facing down.
• Paper Feed Unit (Tray 2): Print side facing up
❒ Print quality cannot be guaranteed if paper other than the ones recommended
is used. For more information about recommended paper, contact your sales
or service representative.
❒ Do not use paper that has already been printed onto by other printers.
❒ When loading the printer, take care not to touch the surface of the paper.
❒ Do not use dirty or damaged paper.
❒ Specify the paper size and type using the control panel.
❒ The remaining paper indicator on the right front side of the paper tray shows
approximately how much paper is remaining.
❒ Duplex printing is only available for the SP C312DN model printer.
Storing Paper
• Paper should always be stored properly. Improperly stored paper might re-
sult in poor print quality, paper misfeeds, or printer damage. Recommenda-
tions are as follows:
• Avoid storing paper in humid areas.
• Avoid exposing paper to direct sunlight.
• Store on a flat surface.
• Keep paper in the package in which the paper came.
To Next Page
Loading...
