PS Menu
63
5
PS Menu
You can set conditions when using PostScript for printing.
Changing the PS Menu
Use the following procedure to change the settings for Resolution.
A Press the {Menu} key.
The menu screen appears.
B Press {U} or {T} to display [PS Menu], and then press the {#Enter} key.
C Press {U} or {T} to display [Resolution], and then press the {#Enter} key.
D Press {U} or {T} to select the resolution, and then press the {#Enter} key.
The selected resolution is displayed for two seconds with an asterisk, and
then the [PS Menu] screen appears.
E Press the {Menu} key to return to the initial screen.
PS Menu Parameters
This section explains about parameters that can be set on the PS Menu.
❖ Resolution
You can specify the print resolution in dots per inch.
Default: 600x600 dpi 1bit
• 600x600 dpi 1bit
• 600x600 dpi 2bit
• 600x600 dpi 4bit
❖ Color Profile
You can select the color profile.
Default: Solid Color
•Off
• Solid Color
•Presentation
• Photographic
ASI066S
To Next Page
Loading...
