Making Printer Settings Using the Control Panel
62
5
❖ Point Size
You can specify the point size you want to use for the default font between 4
and 999.75 in 0.25 increments.
Default: 12.00 points
❖ Font Pitch
You can specify the number of characters per inch you want to use for the de-
fault font between 0.44 and 99.99 in 0.01 increments.
This setting is effective only for fixed-space fonts.
Default: 10.00 pitch
❖ Symbol Set
You can specify the character set for the default font. Available sets are as follows:
Roman-8, Roman-9, ISO L1, ISO L2, ISO L5, PC-8, PC-8 D/N, PC-850, PC-852,
PC-858, PC8-TK, Win L1, Win L2, Win L5, Desktop, PS Text, VN Intl, VN US,
MS Publ, Math-8, PS Math, VN Math, Pifont, Legal, ISO 4, ISO 6, ISO 11,
ISO 15, ISO 17, ISO 21, ISO 60, ISO 69, Win 3.0, MC Text, ISO L6, ISO L9,
PC-755, PC-1004, Win Balt
Default: PC8-TK
❖ Courier Font
You can select a courier-type font.
Default: Regular
•Regular
•Dark
❖ Ext. A4 Width
You can extend the width of the printable area of A4 portrait paper by reduc-
ing side margin width.
Default: Off
•Off
•On
❖ Append CR to LF
You can specify whether or not to append a CR code to each LF code to print
text data clearly.
Default: Off
•Off
•On
❖ Resolution
You can specify the print resolution in dots per inch.
600x600 dpi 1bit
• 600x600 dpi 1bit
• 600x600 dpi 2bit
• 600x600 dpi 4bit
To Next Page
Loading...
