Monitoring and Configuring the Printer
72
6
Making the network related settings
You can set configurations about network connection and communication.
Important
❒ To make the settings about TCP/IP protocol, set TCP/IP “Active” in Interface.
The following operations are possible on the [Network] menu:
• Checking the information about the printer such as Device Name and Active
Protocol.
• Interface settings such as setting the timeout and making protocol to active.
•TCP/IP port settings
•Netware settings
• AppleTalk settings
•SNMP settings
•SMTP settings
Changing the Login Information
On the [Change Login Password] page, you can change the administrator's login
password.
A On the [Configuration] page, click [Change Login Password].
The [Change Login Password] page appears.
B Enter the new password in the [New Login Password] box, and then enter the
same password in the [Confirm Login Password] box.
C Click [OK].
To Next Page
Loading...
