Paper and Other Media
36
5
•
Use the control panel to specify the size.
•
Use the control panel to specify a size as a custom size.
The following sizes are supported:
Tray 1 (approximately): width 148 - 216 mm (5.83 - 8.5 inch); length 210 - 356
mm (8.26 - 14 inch)
Bypass Tray (approximately): width 90 - 216 mm (3.54 - 8.5 inch); length 148
- 900 mm (5.83 - 35.4 inch)
•
The size is not supported.
❖ Paper weight and number of sheets to be set
Check that the top of the stack is not higher than the limit mark inside the
tray.
Supported paper weight
Maximum number of
sheets (plain paper)
Tray 1
60 - 105 g/m
2
(16 - 28 lb.) 500 (80 g/m
2
, 20 lb.)
Bypass Tray
60 - 200 g/m
2
(16 - 53 lb.) 100 (80 g/m
2
, 20 lb.)
Paper Feed Unit (Tray 2)
60 - 105 g/m
2
(16 - 28 lb.) 500 (80 g/m
2
, 20 lb.)
To Next Page
Loading...
