Preparing for Printing
6
1
M Change the printer name if you want, and then click [Next >].
Select the [Yes] check box to configure the printer as default.
N Specify whether or not to share this printer, and then click [Next >].
O Specify whether or not to print a test page, and then click [Next >].
P Click [Finish].
The printer driver installation starts.
Note
❒ When you click [Finish], the [Digital Signature Not Found] dialog box may ap-
pear. To continue the installation, click [Yes].
❒ Auto Run might not work under certain operating system settings. If this
is the case, launch “Setup.exe” from the CD-ROM root directory.
❒ The printer driver in the selected language will be installed.
❒ To stop the selected software installation, click [Cancel] before the installa-
tion is complete.
Reference
For details about checking the printer's IP address, see p.48 “Printing the
Configuration Page”.
For details about reconfiguring the printer settings when the network
printer search fails, see p.4 “If the network printer search fails”.
To Next Page
Loading...
