System Menu
57
5
❖ Auto Email Ntfy
You can specify whether or not to send an error message to a preset e-mail ad-
dress when an error occurs in the printer.
Default: On
•On
•Off
Important
❒ After changing the setting, turn off the power of the printer briefly, and
then turn it on again.
Reference
For information, see Web Image Monitor Help.
❖ System Defaults
You can return the printer settings to their factory-set defaults.
❖ Print Error Pg.
You can specify whether or not to print error logs on the configuration page.
Default: Off
•On
•Off
❖ Anti-Humidity
You can set the printer to produce prints in consistent quality even when hu-
midity is high.
Default: Off
•Off
•Mode 1
Select this mode if printouts are blurred.
•Mode 2
Select this mode if printouts are curled and/or blurred. Note that if you se-
lect this mode, the first print takes longer than subsequent prints to com-
plete.
•Mode 3
Select this mode if printouts are still curled and/or blurred even when
prints are made in [Mode 2]. Note that this mode requires more time to pro-
duce the first print than [Mode 2].
To Next Page
Loading...
