Mac OS Configuration
110
9
•Unit:
Specify the unit of measurement in "mm" or "inch".
•Horizontal:
Specify the horizontal width between 148 and 216 mm (5.83 and 8.50 inches).
•Vertical:
Specify the vertical length between 210 and 356 mm (8.27 and 14.02 inches).
❖ Tray 2
• Paper Size
Specify the paper size for tray 2.
A4 (210 x 297 mm), 8 1/2 x 11
•Paper Type
Specify the paper type for tray 2.
Thinner Paper, Thin Paper, Plain Paper 1, Plain Paper 2, Recycled Paper,
Color Paper, Letterhead, Preprinted Paper, Prepunched Paper
❖ Bypass Tray
• Paper Size
Specify the paper size for the bypass tray.
A4 (210 x 297 mm), 8 1/2 x 11, B5 JIS (182 x 257 mm), A5 (148 x 210 mm),
B6 JIS (128 x 182 mm), A6 (105 x 148 mm), 8 1/2 x 14, 5 1/2 x 8 1/2,
7 1/4 x 10 1/2, 8 x 13, 8 1/2 x 13, 8 1/4 x 13, 4 1/8 x 9 1/2, 3 7/8 x 7 1/2,
C5 Env, C6 Env, DL Env, 16K, Custom Paper Size, Any Size
•Paper Type
Specify the paper type for the bypass tray.
Thinner Paper, Thin Paper, Plain Paper 1, Plain Paper 2, Recycled Paper,
Color Paper, Letterhead, Preprinted Paper, Prepunched Paper, Thick Paper 1,
Thick Paper 2, Labels, Bond Paper, Cardstock, Envelope, Any Type
•Custom Paper Size
Specify the custom paper size, when [Custom Paper Size] is selected.
•Unit:
Specify the unit of measurement in "mm" or "inch".
•Horizontal:
Specify the horizontal width between 90 and 216 mm (3.54 and 8.50 inches).
•Vertical:
Specify the vertical length between 148 and 900 mm (5.83 and 35.43 inches).
Note
❒ Tray 2 is available only when the optional paper feed unit is attached to the
printer.
❒ Only the PCL6 and PostScript 3 printer driver supports custom size paper
longer than 356 mm (14.02 inches). The additional memory unit is required
when using the PCL6 printer driver. The additional memory unit might also
be required when using the PostScript 3 printer driver, depending on the
print data.
To Next Page
Loading...
