Paper Recommendations
41
5
Envelope • When fanning envelopes, make sure they are not
stuck together. If they are stuck together, separate
them.
• When fanning envelopes, make sure the envelope
flaps are not stuck together. If they are stuck together,
separate them.
• Before loading envelopes, flatten them out so that
their curl does not exceed that shown in the illustra-
tion below.
If the curl is severe, flatten out the envelopes using
your fingers, as shown in the illustration below.
• If envelopes are severely curled after printing, flatten
them by bending them back against the curl.
• After printing, envelopes sometimes have creases
along their long edges and toner smear on their un-
printed sides. Their print images might also be
blurred. When printing large, black-solid areas, strip-
ing can occur as a result of the envelopes overlap-
ping.
Paper Type
Thickness (g/m
2
)
Duplex
Enabled paper
feeding tray
Note
Tray 1
Tray 2
Bypass Tray
ASH122S
ASH123S
To Next Page
Loading...
