Paper and Other Media
60
5
C Adjust the paper guide both sides to fit the paper width.
Note
❒ There are paper limit marks on the side of the paper guide. The maximum
paper capacity that can be loaded in the tray is up to the upper line with
Plain Paper 1, Plain Paper 2 (91 - 105 g/m
2
), Thick Paper 1 (106 - 160 g/m
2
),
or Thin Paper (66 - 74 g/m
2
), and up to the lower line with Thick Paper 2
(161 - 200 g/m
2
) or Envelope.
Loading envelopes
Important
❒ Check there is no air in the envelopes before loading.
❒ Load only one size and type of envelope at a time.
❒ Before loading envelopes, flatten their leading edges (the edge going into the
printer) by running a pencil or ruler across them.
❒ Some kinds of envelope might cause misfeeds, wrinkles or print poorly.
❒ Print quality on envelopes may be uneven if parts of an envelope have differ-
ing thicknesses. Print one or two envelopes to check print quality.
❒ In a hot and humid environment, the envelope might be output creased or im-
proper printing quality.
A Hole the middle part of the bypass tray and pull it toward you.
ASI024S
ASI020S
To Next Page
Loading...
